Y Fork, Trailer Saver Extra Padding On our covers

What does this mean...Y fork or a Trailer saver?

In summary this is called many different names depending on where you are in the World, but what it is is a device to protect the motor from bouncing around when trimmed up in the towing or traveling position. Most of them have a 'Y' fork component and usually attach to the trailer at the rear just under the motor.

In recent years they have got a little more sophisticated by adding in "shock absorbers" to the Y fork, but they all are designed to do the same job as the manufactures locking down device, just some use their on rough roads and prefer a fitted Y fork holder or trailer saver.

" A typical Y fork or trailer saver device "
Click images to enlarge
" Extra padding Location and remember we will always make the padding the same color as the main cover "	" We would always recommend you pad the 'Red' parts above, so you don't crush the zip on our full covers "

At Outboard Covers America customer kept asking for a little more padding around where the Full Cover leg and the Y fork meet to prevent wear in the covers leg.

We were happy to say after all these suggestions we took this on board and now offer extra padding normally just above the cavitation plate about 5 inches up. This way if the leg of the motor is NOT locked into position tightly and the leg bounces in the Y fork the cover will not be totally wrecked, but have extra padding to protect the leg and cover from damage.

Padding is a lose term as all we do is sew an extra piece of material on each side of the leg. The cost is very affordable to prevent Y fork ware.

This option like all our options are available when you order securely online.

" Listening to what clients want & developing answers "

©Outboard Covers America 2011